Tung Oil Finish - Ready-to-Use 50/50 Blend
Premium ready-to-use tung oil finish expertly blended with 50% Pure Tung Oil and 50% Pure Citrus Solvent. This traditional hand-rubbed finish formula is ready to apply straight from the container, providing deep penetration, beautiful grain enhancement, and long-lasting protection for interior wood surfaces.
Key Features & Benefits
-
Ready to Use: Pre-mixed 50/50 ratio - no measuring or mixing required
-
100% Pure Tung Oil: American-grown pure tung oil for superior protection
-
Pure Citrus Solvent: Natural, plant-based solvent with pleasant citrus scent
-
Deep Penetration: Soaks into wood fibers for lasting protection from within
-
Hand-Rubbed Finish: Creates classic, warm, natural appearance
-
Enhances Grain: Brings out the natural beauty and character of wood
-
Food Safe: Safe for cutting boards, countertops, and food-contact surfaces once cured
-
100% Natural: No synthetic chemicals, or toxic additives
-
USA Based: Made with American-grown tung oil and citrus solvent
-
Easy Application: Perfect consistency for brush, cloth, or pad application
Ideal For
Furniture, cabinets, wood countertops, cutting boards, butcher blocks, interior doors, wood trim, hardwood floors, musical instruments, antique restoration, wood turnings, and any interior wood project requiring a natural, hand-rubbed oil finish.
Application Instructions
Preparation:
- Wood must be clean, dry, and bare (no previous finish)
- Sand to 150-220 grit for optimal results
- Remove all sanding dust with tack cloth or vacuum
- Stir/Shake Tung Oil Finish thoroughly before use
- Work in well-ventilated area at 65-75°F for best results
Application Steps:
-
Apply Liberally: Using a brush, cloth, or applicator pad, apply a generous coat of Tung Oil Finish to the wood surface
-
Work Into Wood: Rub the finish into the wood grain, ensuring complete saturation
-
Allow Penetration: Let the oil penetrate for 15-30 minutes
-
Wipe Off Excess: Using clean, lint-free cloths, wipe off ALL excess oil until surface feels dry to the touch
-
First Coat Drying: Allow 24 hours for first coat to cure
-
Apply Additional Coats: Repeat process for 2-4 total coats, waiting 24 hours between each coat
-
Light Sanding (Optional): Lightly sand with 320-400 grit between coats for ultra-smooth finish
-
Final Cure: Allow 7-10 days for complete cure before heavy use
Coverage
Approximately 400-500 square feet per gallon on first coat. Subsequent coats will cover more area as wood becomes saturated. Actual coverage varies based on wood species and porosity.
Why 50/50 Blend
The 50/50 ratio of pure tung oil to citrus solvent is the traditional formula used by craftspeople for generations. The solvent thins the oil for easier application and deeper penetration, then evaporates, leaving pure tung oil cured in the wood. This ratio provides the perfect balance of workability and protection.
Drying & Curing
Touch Dry: 24 hours between coats
Light Use: 3-4 days after final coat
Full Cure: 7-10 days for complete hardness
Food Safe: 30 days for food-contact surfaces
Drying times vary with temperature, humidity, and ventilation. Warmer temperatures and good air circulation speed curing.
Pro Tips for Best Results
- More thin coats are better than fewer thick coats
- Always wipe off excess oil - leaving oil on the surface causes sticky, uneven finish
- Work in sections on large projects to ensure proper wiping time
- The finish will continue to harden and darken slightly over the first 30 days
- Buff with soft cloth after final cure for enhanced luster
- Reapply annually or as needed to maintain protection and beauty
Safety Information
- Use in well-ventilated area
- Wear gloves to protect skin
- Keep away from heat and open flames
- Keep out of reach of children and pets
- Avoid eye contact
Technical Specifications
- Composition: 50% Pure Tung Oil, 50% Pure Citrus Solvent
- Tung Oil Source: American-grown and pressed (USA)
- Solvent: Natural citrus-based (d-limonene)
- VOC: Low VOC natural formula
- Coverage: 400-500 sq ft per gallon (first coat)
- Drying Time: 24 hours between coats
- Full Cure: 7-10 days
- Finish: Natural matte to satin hand-rubbed appearance
- Food Safe: Yes, after 30-day cure
- Origin: Made in USA
- Available Sizes: 4 oz, 8 oz, Pint, Quart, Gallon, 5 Gallon, 55 Gallon Drums
Maintenance
Tung oil finishes are easy to maintain. Simply clean with mild soap and water, allow to dry, and reapply one coat of Tung Oil Finish annually or when water no longer beads on the surface. Spot repairs are easy - just apply oil to worn areas and wipe off excess.
Why Choose Heritage Tung Oil Finish
Our Tung Oil Finish uses only the highest quality American-grown pure tung oil blended with natural citrus solvent. No driers, no synthetic additives, no compromises. This is the authentic, traditional formula that has protected and beautified fine woodwork for centuries. We make it easy by pre-mixing the perfect ratio, so you get professional results every time.
