A superior non-staining joinery, end grain sealer and buffing wax top coat. Use alone or as a finish coat on any woodwork for added sheen and protection. Also refurbishes dry, dull logs, timbers, or anything made of wood. Apply one of two ways: rub in as a polish and buff dry, or apply, let dry, and polish with a power buffer. This product is excellent for periodic maintenance and cleaning of timber frames. For joinery or end grain, simply paint on Liquid Wax before long-term storage to reduce checking or just before putting piece into place for easier fitting and extra protection.
Our Liquid Wax is a versatile product whose name suggests only one of several possible uses. Here are five different applications to get the most out of the product and protect and enhance your project.
Five Uses for Liquid Wax End Sealer
Sealing End Cuts:
If your timber frame project makes use of unseasoned timber, it’s important to slow down moisture loss to prevent surface checking. Checking tends to occur when the moisture is looking for a way out of the surface of a timber. The degree to which it happens is directly related to how quickly it is shedding that moisture.
Freshly cut timber ends can be coated with Liquid Wax to slow down moisture transpiration. It’s important that wood (of all dimensions) be allowed to transpire moisture, but we want to slow it down to a manageable rate. A light brushing on both ends of the timber will go a long way to prevent excessive checking.
Protecting End Grain in Joinery:
Because moisture loss occurs most rapidly through exposed end grain, it is equally important to coat exposed end grain in joinery. The end walls in a mortise are the perfect example. Use a brush the same size or slightly smaller than your mortise width (for example, 1 ½” or 2” wide) to coat the end grain with Liquid Wax. Again, this will help slow down moisture loss through the end grain and prevent additional checking at joinery locations. Joist pockets, rafter seats, and tenon shoulders are other examples where a light application of Liquid Wax would be beneficial.
Make Your Timber Frame Assembly Process Smoother:
It’s also possible to make the assembly process a smoother operation by very lightly brushing wax onto adjoining pieces, a tenon being the perfect example. Lightly apply wax to the tenon cheeks if your joinery fits are particularly tight.
Drive Pegs More Easily:
Just like above, a little bit of wax can go a long way. When pegging your joinery, use a rag that has been saturated in wax to rub down the peg to make hammering it much, much easier. Your arms and wrists will thank you later.
Protect Your Tool Handles:
Wooden tool handles are easy to ignore, but they benefit from a little bit of TLC every once in a while. Using a rag saturated with wax, rub down your chisel, mallet, axe, and slick handles with a light coat to keep them looking good and the wood in fine condition.
A little bit of Liquid Wax can go a long way for your building projects. We also use it on our boots around here! Do you have any other favorite uses of our Liquid Wax? Write us and let us know.
Coverage:
Approx. 800 + square feet per gallon; rough-sawn materials tend to absorb more. You get less coverage on the first coat and more on the second. The density of the wood is also a factor. Softer woods like pine or reclaimed Doug. Fir will absorb more than oak for example. And obviously dry wood will soak up a lot more oil than green timbers. You may want to over-estimate when ordering.The finish keeps indefinitely when stored properly with minimal air exposure.
Clean Up:
For spills, over spray, or to clean up brushes, use our Pure Citrus Solvent or other solvent (Turpentine, Mineral Spirits, etc.).
100% Bio-based. Food safe once dry.